MCL-C10 | Melamine Compression Cleaning Material

Harmonization Code : 3909.20.00.90 | Amino-resins, phenolic resins and polyurethanes, in primary forms : Melamine resins : Other

Melamine Compression-Grade Mold Cleaning Compounds

Main features

  • 0.07% Formaldehyde
  • Compression grade
  • Suitable for transfer mold equipment

Product Description

MCL C10 is a compression-grade melamine mold cleaning material designed for cleaning transfer molding equipment and epoxy molds. While more rigid than the rubber cleaning solutions it is able to go into the deepest corners of the mold removing hidden and hard to approach stains. This product is applied by manually laying an appropriate amount of product on top of the mold and applying heat and pressure (compression). A typical schedule is 2 - 5 minutes @ 150 - 190°C with 10tons clamping pressure for a good result. It is very easy and effective to handle so it requires only ~ 3 shots to clean all stains and residues for most cleaning processes.

MCL-C10 can be supplied in loose powder if you want to pelletize yourself, in granular form and potentially in 5 x 5cm melamine cleaning pellets with a V groove break point to make it easier to break, lay down and apply on the mold. MCL-C10 has almost nonexistent amounts of Formaldehyde (0.02 - 0.07%). This proven formulation cleans very well without being toxic to the people involved in the process.

Product Family

LINQ MCL-C10

1. Select Package Type
2. Select Product Form
3. Select Pellet Size

Loading pricing…

Product availability
US Shipping in 8 weeks
CA Shipping in 8 weeks
EU Shipping in 8 weeks
Packaging
Please select Package Type, Product Form and Pellet Size.
TDS, SDS & Technical Documents

Technical Specifications

General Properties
Color
The color
White
Density (g)
1.3 g/cm3
Specific Gravity
Specific gravity (SG) is the ratio of the density of a substance to the density of a reference substance; equivalently, it is the ratio of the mass of a substance to the mass of a reference substance for the same given volume. For liquids, the reference substance is almost always water (1), while for gases, it is air (1.18) at room temperature. Specific gravity is unitless.
1.5
Thermal Properties
UL 94 Rating
Flammability rating classification. It determines how fast a material burns or extinguishes once it is ignited. HB: slow burning on a horizontal specimen; burning rate less than 76 mm/min for thickness less than 3 mm or burning stops before 100 mm V-2: burning stops within 30 seconds on a vertical specimen; drips of flaming particles are allowed. V-1: burning stops within 30 seconds on a vertical specimen; drips of particles allowed as long as they are not inflamed. V-0: burning stops within 10 seconds on a vertical specimen; drips of particles allowed as long as they are not inflamed. 5VB: burning stops within 60 seconds on a vertical specimen; no drips allowed; plaque specimens may develop a hole. 5VA: burning stops within 60 seconds on a vertical specimen; no drips allowed; plaque specimens may not develop a hole
V0
Other Properties
RoHS Compliant
RoHS is a product level compliance based on a European Union Directive which restricts the Use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHS). Products compliant with this directive do not exceed the allowable amounts of the following restricted materials: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE), with some limited exemptions
Yes
Physical Properties
Spiral Flow @ 175°C
7.62 cm

Additional Information

Compression mold cleaning for transfer equipment? Is this a typo?
 
Don't be confused with compression grade mixed up with transfer mold. Cleaning process and terminology is slightly different from molding. A compression cleaning compound is literally compressed on top of a transfer mold. It might sound confusing but that's industrial terminology for you.
 

Leading Brands Trust in Our Products and Services

Products that Perform| Knowledge that Serves| Service that Delivers