CYBERBOND 2241
Harmonization Code : 3506.10.00.00 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg
Main features
- Toughened Structural Bonding
- Metal, Plastic, and Rubber Bonding
- Up to 140 deg C Service
Product Description
CYBERBOND 2241 is a black, fast-setting, rubber-toughened ethyl cyanoacrylate adhesive from the xtraflex Series. Designed as a partly flexible adhesive, it provides shock absorbence and high temperature resistance, making it excellent for dynamic, temperature-loaded bonds and combination bonding of metals to rubber or plastics.
Key features
- Rubber toughened: Offers partial flexibility to absorb shocks and withstand dynamic loads.
- High temperature resistance: Maintains performance across a broad service temperature range of -55 to 140°C.
- Fast bonding performance: Features quick setting times, such as 6-16 seconds on EPDM and 7-13 seconds on ABS plastics.
Applications / Suitable for
- Combination bonding of metal to rubber.
- Combination bonding of metal to plastic.
- Applications requiring shock absorbence and dynamic load resistance.
TDS, SDS & Technical Documents
Technical Specifications
General Properties
Color
Black
The color
Specific Gravity
1.06 g/cm³
Specific gravity (SG) is the ratio of the density of a substance to the density of a reference substance; equivalently, it is the ratio of the mass of a substance to the mass of a reference substance for the same given volume.
For liquids, the reference substance is almost always water (1), while for gases, it is air (1.18) at room temperature. Specific gravity is unitless.
Physical Properties
Viscosity
2,000 to 4,000 (Uncured Monomer) mPa.s
Viscosity is a measurement of a fluid’s resistance to flow.
Viscosity is commonly measured in centiPoise (cP). One cP is defined as
the viscosity of water and all other viscosities are derived from this base. MPa is another common unit with a 1:1 conversion to cP.
A product like honey would have a much higher viscosity -around 10,000 cPs-
compared to water. As a result, honey would flow much slower out of a tipped glass than
water would.
The viscosity of a material can be decreased with an increase in temperature in
order to better suit an application
Additional Information
Technical properties
As-supplied / before-processing properties
Uncured monomer properties of CYBERBOND 2241.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Base Compound | Ethyl-2-cyanoacrylate | - | - |
| Appearance | Black | - | - |
| Density | 1.06 | g/cm³ | at 20°C |
| Viscosity | 2000-4000 | cps | cone-plate, @ 20°C @ 160 rpm |
| Setting Time (Metal/Steel) | 30-90 | seconds | - |
| Setting Time (EPDM) | 6-16 | seconds | - |
| Setting Time (Plastic/ABS) | 7-13 | seconds | - |
Technical properties
After-processing / final-state properties
Physical properties of cured CYBERBOND 2241 polymer.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Service Temperature Range | -55 to 140 | °C | - |
| Strength (Steel) | 18 to 28 | N/mm² | - |
| Strength (NBR-rubber) | 5 to 12 | N/mm² | Material failure |
