COOLTHERM EP-6252

Harmonization Code : 3910.00.00.90 | Silicones in Primary Forms; Others

COOLTHERM EP-6252

Main features

  • Defined Epoxy Hardener Component
  • Electrical Encapsulation System Use
  • Component-Level Metering Control

Product Description

CoolTherm EP-6252 Hardener is the curing-agent component used with selected CoolTherm and Thermoset epoxy resins in two-component electrical encapsulation and bonding systems. This page represents the hardener only, so mix ratio, cure schedule, and final thermal, electrical, or mechanical properties depend on the paired resin. Component-level appearance, viscosity, specific gravity, storage, and shelf-life data support handling and metering before system mixing. It is relevant where EP-6252 Hardener is required as part of a defined Parker LORD epoxy formulation.

Key features

  • Defined hardener component: The product is the curing-agent side of selected two-component CoolTherm and Thermoset epoxy systems.
  • Electrical encapsulation system use: The component is used in epoxy systems for electrical encapsulation and bonding.
  • Component-level handling profile: Viscosity, specific gravity, storage, and shelf-life data support metering and material handling.
Product Family

COOLTHERM EP-6252

Loading pricing…
TDS, SDS & Technical Documents

Technical Specifications

General Properties
Appearance
Appearance at room temperature.
Amber Liquid
Specific Gravity
Specific gravity (SG) is the ratio of the density of a substance to the density of a reference substance; equivalently, it is the ratio of the mass of a substance to the mass of a reference substance for the same given volume. For liquids, the reference substance is almost always water (1), while for gases, it is air (1.18) at room temperature. Specific gravity is unitless.
0.99
Physical Properties
Viscosity
Viscosity is a measurement of a fluid’s resistance to flow. Viscosity is commonly measured in centiPoise (cP). One cP is defined as the viscosity of water and all other viscosities are derived from this base. MPa is another common unit with a 1:1 conversion to cP. A product like honey would have a much higher viscosity -around 10,000 cPs- compared to water. As a result, honey would flow much slower out of a tipped glass than water would. The viscosity of a material can be decreased with an increase in temperature in order to better suit an application
75 mPa.s

Additional Information

Technical properties

As-supplied / before-processing properties

Component-level properties and scope for the hardener-only page. Complete-system values depend on the paired resin.

Property Value Unit Method / condition
Product component Hardener component Paired resin is not included in this record
Component function Epoxy curing agent Part of a two-component system
Compatible system context Selected CoolTherm and Thermoset epoxy resins Use with a defined paired formulation
Primary system functions Electrical encapsulation and bonding Complete-system performance depends on the paired resin

Leading Brands Trust in Our Products and Services

Products that Perform| Knowledge that Serves| Service that Delivers